The sticker sheet builder lays many stickers out on one sheet. Each design gets its own cut line, you choose how many copies of it you want, and the builder packs them onto the sheet size you picked.
The screen has three parts: a panel on the left with My Stickers, Gallery and Material, the sheet in the middle with a toolbar above it, and the top bar with Save, Designs and the cart button.
Add Your Artwork
- Open the My Stickers tab.
- Drop files onto Drop Artwork Here, or click it to browse. PNG, JPG, SVG, AI, EPS and PDF files are accepted, up to 50MB each.
- To use the shop's artwork instead, click Gallery. The tab is grayed out when the shop has not turned its gallery on.
- The Configure Sticker window opens for each image. Set it up as described below, then click Add to Sheet. When you upload several files at once, the button reads Add & Next until the last one, and Skip leaves an image out.
A file over 50MB is rejected with the message File size exceeds the 50MB limit.
Set Up Each Sticker
The Configure Sticker window has four tabs: Cutline, Enhance, Effects and Text. Set the sticker's width and height under Size; the lock between them keeps the artwork's proportions.
On the Cutline tab:
- Cut Line Type offers Contour Cut, Edge Cut, Rectangle, Rounded, Oval and Circle. The shop decides which of these to offer and may rename them, so you may see fewer.
- Margin runs from 0% to 20% in half-percent steps and starts at 5%. It sets how much space sits between your artwork and the cut line.
- Smoothing appears for Contour Cut and Edge Cut and evens out the traced path.
- Corner Roundness appears for Rounded.
- Background is None or Solid, with a color for the area inside the cut line.
The Enhance tab has Background Removal and Upscale 4×, unless the shop has turned those tools off, and Brightness, Contrast, Saturation and Temperature sliders that run from -100 to 100.
To change a sticker after it is on the sheet, click Edit on it in My Stickers. The button then reads Save Changes.
Choose How Many Copies
Each design appears as a row in My Stickers. Use the plus and minus buttons, or click the count to type a number. A design can have up to 250 copies, and 0 removes it from the sheet.
When a sticker is selected on the sheet, its width, height and DPI show at the bottom of the left panel. Tick Apply to all copies to resize every copy of that design at once. The smallest size is 0.25 in.
Arrange the Sheet
The toolbar above the sheet holds the sheet size menu and these tools:
- AutoNest packs every sticker onto the sheet as tightly as it can.
- Fill Sheet fills the remaining open space with copies of the selected sticker.
- Duplicate, rotate 90° either way, and align left, center, right, top, middle or bottom.
- Undo and redo, which keep the last 50 changes.
Sheet Utilization in the left panel shows how much of the sheet is used, with your design and sticker counts. Press ? to see the keyboard shortcuts.
A move, rotation or alignment that would overlap another sticker or leave the sheet is refused, and the builder tells you why.
Pick a Material and Laminate
- Open the Material tab. A dot on the tab means a choice is still needed.
- Click a material. The shop sets the materials and their prices; there is no default, so you must choose one.
- If the shop offers laminates, click Select next to one, or next to No Laminate.
The Sheet total card shows the price as it builds up: the sheet size, plus the material and laminate.
Save and Come Back Later
The label under the sheet name in the top bar shows where your work stands: Auto-saving..., Auto-saved, Saving..., Save failed or Not saved.
- Every change is saved in your browser a moment after you make it. If you reload or reopen the product, the builder shows Restored your auto-saved sticker sheet. A sheet that has already been ordered is not restored.
- While you have unsaved changes, the builder also saves the sheet to the shop every 2 minutes.
- Save saves it straight away. It needs at least one sticker and a sheet size.
- Designs opens your saved designs so you can reopen a sticker sheet.
Add the Sheet to Your Cart
- Check the price on the cart button. It matches the Sheet total.
- Click Add to Cart. When you are editing a sheet already in your cart, the button reads Update Cart.
The builder will not add the sheet until it has at least one sticker, a material, and a laminate choice when the shop offers laminates. It opens the Material tab to show you what is missing.